你好。
Hello.

在本教程中，我们将学习电源，好吧，图中的电源是什么？
In this tutorial, we will learn power supplies, OK, and what is power supply in the image?

您可以看到电源及其侧面。
You can see the power supplies and their side.

你会看到L。
You will see L.

这就是那是什么意思。
And this is and what is that means.

这是我们的路线。
This is our line.

好的。
OK.

例如，您将在这里看到它正在写入 101 至 240 伏交流电。
So for example, one and you will see in here it is writing 101 to 240 volt AC.

那么这意味着什么呢？
So what does that means?

我们需要给这些电源供电吗？
We need to give to these power supply?

这个牧场的电源是交流电。
This ranch power is AC.

好的，现在想象一下这是 210 20 伏交流电源，我们要给出。
OK, so now imagine this is 210 20 volt AC power supply and we are going to give.

好的。
OK.

所以在这里我们给它一个自然的确定。
So in here we are giving it a natural OK.

从这里我们有一条线。
And from here we have a line.

好的，线电压。
OK, line voltage.

然后在电源结束时，这里发生了什么？
And then at the end of this power supply, what is happening in here?

你可以看到这一边是正，这一边是负。
You can see this is plus and this side is minus.

而且，这也没关系。
And also, this is OK.

而且这也是正输出。
And also this is plus output.

这是这些电源的负输出。
And this is this is minus output for these power supplies.

你需要看一下。
You need to take a look.

电源有输出，可以吗？
The power supply is output, OK?

又如输入输入稳定，但输出则需要重点关注这里。
And as input input is stable, but output, you need to focus in here.

上面写的是OK，这个热转印故障，OK，发薪日5.0。
It is writing OK, this heat transfer fault, OK, 5.0 on payday.

所以这个电源让我们的线路电压下降，好吧，线路电压并培育并将其转换为直流电，所以你需要看看听到的。
So this power supply gets our line falls, OK, line voltage and nurture and convert it to DC, so you need to take a look to hear.

每个人都会收到一份有关该电源的遗书。
Each gets a suicide note for this power supply.

它将这个交流信号转换为直流信号，五个 Petr 是我们在发薪日的最大值，好吗？
And it turns this AC signal to DC Signal and five Petr is our maximum on payday, OK?

所以我们现在正在做的事情，我们会听到，我们就是这样。
So what we are doing now, we are going to hear from that and we are this.

这些是我们的克莱门斯盒子。
These are our Klemens boxes.

好的。
Okay.

这是我们的矿工，这是我们的。
And this is our miners, and this is our.

好吧，没错。
Okay, that's right.

是的，这是我们的地方。
Yeah, this is our place.

就像这样，好吧，从我们要去 PRC 或中继或另一个 DC 的地方。
And like that, OK, from the place we are going to PRC or relay or another DC.

好的。
Okay.

嗯。
Um.

在使用 D.C. 的其他设备中
In other devices working with the D.C.

直流电，也来自矿工，我们将去塞拉利昂等。
direct current and also from the miners, we will go to Sierra Leone, etc.

因为为什么你有电箱呢？
Because why while you have electrical box?

好的。
OK.

这是你的配电箱和你正在做的事情，这是你首先放在这里，然后你只是把它放在这里。
This is your electrical box and what you are doing, this is your in here first and then you are just putting here.

好的？
OK?

请参阅信号三 80 伏交流电或仅 220 伏交流电。
A see signal three 80 voltage AC or just two hundred and twenty volt AC.

就这样。
That's all.

然后你从哪里得到直流信号，好吗？
And then where you get from that you get a DC signal, OK?

他们会发现您正在从电源获得交流电源。
They're going to find it that you are getting the AC power from the power supply.

就这样。
That's all.

然后，该电源最多可为 5 个障碍或 10 个障碍或 Typekit 或 2.5 个裁判。
And then this power supplies can be maximum five impedir or 10 impedir or Typekit or 2.5 umpired.

好的？
OK?

您需要选择它。
You need to select it.

但根据什么？
But according to what?

好吧，当你把这些电源放到配电箱内的设备上时，你需要计算一下，好吧。
OK, when you put these powers to your devices inside of the electrical box, you need to calculate, OK.

所以你需要说。
So you need to say.

政策输出有多少？
How many output of policy?

这个输出是什么？
And what is this output?

出来的是，例如，从这里，如果你直接去武尔夫，好的，如果这个是，例如，药丸三腋下。
What is out was, for example, from here, if you go to the directly to Wulff, OK, and if this one is, for example, pills three armpit.

例如，如果您有五个妻子在一天结束时喜欢它，则可以减少此电源。
And if you have, for example, five wife liked it at the end of the day, this power supply can be diminished.

因此，你需要看一下，例如，这是你的政策，这是你的政策输出，好吗？
Because of this, you need to take a look to, for example, this is your policy and this is your policy output, OK?

如果这个输出直接连接到这个电源，好吧，你需要说，好吧，这个输出，例如，每天5000万，这个输出是多少，这个策略需要直流电压和拉电流，还有与电流相关，承包商与电流相关。
And if this output is directly connected to this power supply, OK, you need to say, OK, this output, for example, 50 million per day and how many this output and also this policy needs to DC voltage and pull a current and also relate to a current and the contractor to a current.

配电箱内的每个设备都以直流电运行。
And every device inside of your electrical box is running for DC.

电压将拉动电流并在一天结束时完成。
Voltage is going to pull a current and done at the end of the day.

我只是给你一个解决方案，这是你的电源。
I'm just giving a solution to your this is your power supply.

但是多放一个电源，这个电源就只有四个了。
But put one more power supply and this power supply just four.

请查看此电源和其他组件，好的，还有其他组件，例如继电器、接触器，例如，可能会使两个驱动器、阀门过载，仅此而已。
Please see this power supply for and other components, OK, and other components like relays, contactors and, for example, maybe overload the two drives, valves and that's all.

因此，在本教程的最后，我们知道我们需要选择电源以将信号转换为直流信号，以及我们需要如何选择它。
So at the end of this tutorial, what we know we need to select our power supply to convert our signal to DC signal and how we need to select it.

我们需要看看它的输出。
We need to take a look to output on it.

这是输出电压的首要内容。
This is the first thing an output voltage is.

这是第二件事，好吗？
This is the second thing, OK?

如果你问我，这只是220伏吗？
If you ask me, is this just the 220 volt?

不。
No.

有些电源是。
Some power supplies are.

308、他们看到的是输入和输出联合转发，好吗？
308, what they see is input and output is joint forward, OK?

仅此而已，但一般来说并不重要。
That's all, but it doesn't matter generally.

这是我们在工业自动化和这里使用的电源。
This is our power supplies that we are using in the industrial automation and in here.

另外，也许你还需要一件事来集中精力，好吗？
Also, one more thing maybe you need to maybe you focus to it, OK?

这还算可以吧。
This is a just OK.

这就像一个潜在的问题。
And this is just like a potential matter.

好的。
Okay.

然后减去和加上，如果你增加它，输出电压，想象一下现在的趋势，然后你需要增加这个调整区域。
And then minus and plus if you increase it, the output voltage, imagine now the trend toward this and then you need to increase this adjustment area.

好的，就这样，它会增加。
OK, like that and it will increase.

然后还有一个限制，即最小值（例如 18 伏）和最大值（例如）。
Then there's a limit also the minimum, for example, 18 volt and maximum, for example.

二十八伏，可以，在这个范围之间。
Twenty eight volt, OK, between this range.

你可以把这个电源的输出加起来就可以了。
You can add up the output of this power supply that that's all.

然后您需要将电源加减连接，然后您就可以使用电气箱中的直流信号运行并存储和完成项目。
And then you need to put your powers plus and minus connections, and you can run with the DC signal in your electrical box and projects for storage and finished.

这是工业自动化中非常非常基本的组件。
This is really, really basic a component in for industrial automation.

如果你有问题，可以问我。
If you ask a question, you can ask me.

我们下个教程见。
See you in the next tutorial.